Designed for the Blink 4 Outdoor camera, you can mount the camera to a window using three large suction cups and easily relocate it if needed. Has a wide shield to prevent glare or reflection coming from the back of the camera.
If there are streetlights in the place you need to monitor, you need to turn off “night vision ” and "Status LED" in the settings. If there is no light in the place you need to monitor, you will not be able to use the night vision function; otherwise, there will be reflections
These are a snug fit, just to make sure the camera stays in place.
Dimensions:
4-3/8” W x 4-1/2” H x 1-1/4” D
You will need to account for the additional space that the attached suction cups, camera, and wiring will occupy.
What's Included:
- 1x 3D printed WM for BLINK 4 Outdoor Camera
*** This is made for the BLINK 4 Outdoor Camera and will not work with other version cameras ***
* This listing is for a window mount only; camera, wiring, or anything not listed above are not included. Only use pictures for reference. "
BLINK 4 Outdoor Camera Window Mount with suction
Please note that layer lines will be present and may have minor imperfections, but will not affect functionality. This is due to the 3D printing process.
Not all 3D prints are the same. Our 3D prints are made with quality PLA+ filaments. PLA+ is stronger and more rigid than standard PLA, as well as having a higher level of toughness.
We don't use Generic filament or Standard filament; they are cheap and low quality, and will not last.
The majority of our prints are thick and solid, unlike the thin and hollow prints found in many other products.