This Universal Back Plate / Wall Plate can be used horizontally or vertically with many devices.
A customer requested that we make a back plate for their Audio/Video Tenant Station Doorbell.
So we made this slightly larger than your device with a large hole in the center.
We do not own a suitable device for listing or making instructions, so please use your imagination.
Tools are needed and are not included.
Leveler, painter's tape, and silicone glue if needed.
How to Install:
Remove the old Thermostat or the device and cover up the wires
#1 Apply the back plate to the desired area, use a leveler if needed, and use making tape to hold in place.
#2 Screw in the back plate. Keep the screw as close to the center as possible (pre-drill if necessary).
#3 Center the mounting plate from your device and screw it in. (The Grey plate represent your device's mounting plate).
#4 Connect the wire and put your device on the mounting plate.
Please be safe, remember to turn off the power from your electrical box.
Dimensions:
#1 - 8-5/8" W x 6-5/8" H x 1/4" D
What's Included:
- 3D printed Back Plate
- 8x Screws
Needed a different size, please get in touch with us.
* This listing is for Back Plates only; thermostats, or anything not listed above, are not included. Only use pictures for reference. "
Universal Back Plate, Wall Plate 3D Printed
Please note that layer lines will be present and may have minor imperfections, but will not affect functionality. This is due to the 3D printing process.
Not all 3D prints are the same. Our 3D prints are made with quality PLA+ filaments. PLA+ is stronger and more rigid than standard PLA, as well as having a higher level of toughness.
We don't use Generic filament or Standard filament; they are cheap and low quality, and will not last.
The majority of our prints are thick and solid, unlike the thin and hollow prints found in many other products.