This is a Window Mount for the Ring indoor camera. It can be mounted on a window or anywhere that double-sided tape sticks to. Comes with two double-sided tapes, one already on the mount, and one is a spare.
Dimensions:
2-1/4"W x 2-5/6"D x 1-1/4"H
What's Included :
- 1x 3D printed Window Mount for Ring indoor camera
- 2x Double-sided tape
*** This is for the Ring indoor camera and will not work with the Stickup camera. For Stickup camera mount, please check out my other listing ***
* This listing is for the camera mount only; camera, wiring, or anything not listed above is not included. Only use pictures for reference. "
** TO AVOID DAMAGE TO YOUR CAMERA, PLEASE FOLLOW THE INSTRUCTIONS: Clean the surface with alcohol swabs and wipe dry cloth or paper towels, then apply the mount to the glass. Firmly press in for 10 sec, " careful not to break the glass". If you removed the mount to reposition, please do not reuse the tape; it has been contaminated.
*** Please be patient and allow 24 hours for the double-sided tape to bond to the 3D Prints and the window before use. If it's cold outside, please give it some more time before use. ***
V1.5 Window Mount for Ring Indoor Camera ( double-sided tape )
Please note that layer lines will be present and may have minor imperfections, but will not affect functionality. This is due to the 3D printing process.
Not all 3D prints are the same. Our 3D prints are made with quality PLA+ filaments. PLA+ is stronger and more rigid than standard PLA, as well as having a higher level of toughness.
We don't use Generic filament or Standard filament; they are cheap and low quality, and will not last.
The majority of our prints are thick and solid, unlike the thin and hollow prints found in many other products.