This is Version 2, it's longer & wider with some improvements.
I wanted to use my Camera and Solar panels, but I had 10ft of wires and hated all those excess wires. I can keep all the cords neat with this mount by hiding them inside the mount and keeping my cable protected from the squirrel.
It can be mounted to any flat surface that can be screw into. For stucco or brick surfaces, you'll need to upgrade to longer screws and use anchors.
There are premade holes for Ring cameras. Other cameras can be used, but new mounting is required.
Solar panel mounting holes vary from manufacturer, so there are no pre-made holes for solar panels. You'll need to pre-drill small holes and screw them in.
Compatible Cameras:
Ring Stick-Up Camera
Ring Stick-Up Camera PRO
Ring Spotlight Camera Plus
Ring Spotlight Camera PRO
Ring Outdoor Cam Plus
Dimensions:
4” W x 8-7/8” H x 1-1/2” D
What's Included:
- 1x 3D printed Solar & Camera Mount
- 2x Rubber seal
- 2x Large Screws
- 3x Medium Screws
- 4x Small Screws
Link to PDF file
https://drive.google.com/file/d/1Ew7J-a2pk3IX5idzgO7WqKGd3o_CWwD_/view?usp=sharing
This listing is for the mount only; solar panels, camera, mounting plate, camera base, wiring, or anything not listed above is not included. Only use pictures for reference.
V2 Solar Mount for RING Stick Up Cam Pro with Cable management
Please note that layer lines will be present and may have minor imperfections, but will not affect functionality. This is due to the 3D printing process.
Not all 3D prints are the same. Our 3D prints are made with quality PLA+ filaments. PLA+ is stronger and more rigid than standard PLA, as well as having a higher level of toughness.
We don't use Generic filament or Standard filament; they are cheap and low quality, and will not last.
The majority of our prints are thick and solid, unlike the thin and hollow prints found in many other products.